Aderval S. Luna
This work is directed to the dissemination of the multivariate statistical methods applied in the optimization of methods in atomic spectrometry. It was proposed, in particular, work published covering methods of variable selection also called screening methods, response surface design, as well as optimization methods.
Keywords: Multivariate statistical methods,atomic spectrometry.
ANALYTICAL ATOMIC SPECTROSCOPY will be indexed in the following abstracting databases:-
The journal of "ANALYTICAL ATOMIC SPECTROSCOPY" is an international, peer-reviewed and Open Access journal published by "Payam Scientific Publishing. This journal publishes original articles on all areas of ANALYTICAL ATOMIC SPECTROSCOPY. This jourrnal covers both fundamental and applied research in ANALYTICAL ATOMIC SPECTROSCOPY . The main objective is to provide researchers free online access to high-quality articles having outstanding scientific significance .
Please make sure that the submitted manuscript has not been published previously and has not been considered for publication elsewhere at any time during review period. Generally, accepted papers will appear online within 2 days of acceptance. ANALYTICAL ATOMIC SPECTROSCOPY will consider (but not limited to) following techniques for publication :
We are considering both Experimental and theoretical research work for the publication in "ANALYTICAL ATOMIC SPECTROSCOPY".
|Deaprtment of Analytical Chemistry, MRio de Janeiro State University/Institute of Chemistry,
Dr. Aderval S. Luna is a Full Professor in Department of Analytical
Chemistry. He obtained his Ph. D degree in 2000. During 1999-2000 he
worked at the National Research Council, Canada as a research
scientist. He has authored/co-authored more than 70 refereed journal
papers, 8 book chapters, 2 books and has made more than 30 invited
presentation at the national and international conferences. His
research work has obtained more than 1000 non-self-citations with H
index of 16. His research interest includes design and analysis of
experiments; multivariate calibration; pattern recognition; atomic
spectrometry (FAAS, CV-AAS, HG-AAS, ICP-OES, PVG-ICP-OES);
molecular spectrometry (FT-NIRS, FT-mid-IRS, Raman,
Spectrofluorescence). He was the academic advisor of MSc (27) and
Ph.D. (7). Actually, he is an academic advisor of MSc (2) and Ph.D. (4).
In order to submit a new manuscript for the ANALYTICAL ATOMIC SPECTROSCOPY, please click on the button "PROFILE" and then Register youself to log in to the Payam Publishing System.
Corresponding author is requested to make sure that manuscript is prepared according to the Instructions for Authors. We are also providing Checklist to help you.
The corresponding author is requested to submit the manuscript through Payam Publishing System.If you are facing problem during submission, please submit your manuscript through email.The Email for submission is
We are encouraging and appreciating authors for adopting online submission through Payam Publishing System
For rapid publication, authors are requested to submit new manuscripts via the Payam Publishing System. We also accept manuscripts submitted by email . Please check submission Checklist before submitting new manuscript to ANALYTICAL ATOMIC SPECTROSCOPY.
The manuscripts submitted in ANALYTICAL ATOMIC SPECTROSCOPY are subject to a peer review process. The Chief-Editor/Editor makes a decision for manuscript publication, revision or rejection after getting remarks from Reviewers.Accepted manuscript is subject to copyediting to make sure that they conform the ANALYTICAL ATOMIC SPECTROSCOPY style.Once, we receive corrected proof of the manuscript, it will be published online as a pdf and HTML format.DOI number will be activated within 15 days of the publication.
Following formats are acceptable for publication in ANALYTICAL ATOMIC SPECTROSCOPY:
Authors are requested to specify one of the following types of article while submitting in ANALYTICAL ATOMIC SPECTROSCOPY :
Full Research Paper, Letter, Review, Commentary, Book Report
But, if you are not able to decide article type,please specify as Full Research Paper.The guidelines of Full Research Paper are given below.
Manuscripts for Full Research Paper submitted to the ANALYTICAL ATOMIC SPECTROSCOPY should be divided into the following sections:
Title, Authors' Names and Affiliations, Abstract, Keywords, Introduction, Theorical Concept (optional), Results and Discussion, Conclusion (optional), Experimental (optional), Supporting Information (if any),Acknowledgements (optional), References
The title of the research paper is such that the readers quickly indentify the focus of the research work.It should be clear and concise.
Each contributing author must specify his/her first name, middle initial(s) and last (family) name.Please provide the institution/University affiliation information in the following manner:
department, organization, street/P.O. box, city/town and zip code/postal code, country.
Email of the corresponding author(s) must be given.
Please write concise abstract.It should not exceed 400 words.You can structure your abstruct by specifying Background of the research work,purpose, results, the main scientific findings,conclusion, applications of present research. Abbreviations should be avoided in the abstract. Don't use citations and references in abstract.
Five keywords of the research paper should be given for indexing purpose. Please separate each keyword with semicolon.
The introduction of the research paper should be very simple so that researcher without specilized knowledge can understand the work.A paragraph should be dedicated for applications, purpose of research and research gap.There shuld be some review in your research area.
The theoretical research paper must write proper theoretical calculation in this section.They should heighlight what kind of sigificant changes in the previous theory has been made in the present work.Author can also propose new theory which shuld be properly specified.
This section should contain the discription of the experiments and discussion of the experimental findings.The experimental findings must be supported by relevent references/experimental data.The proper discussion should be given to enhance the existing knowledge in the relevant field. Information alreadydisplayed in tables or figures should not be reiterated in the text until it is necessary for any important discussion.
This section of the research paper should emphasize the major findings and significance of the paper.
In the experimental section, authors should describe the methods in sufficient detail so that other can reproduce the same results. New experimental Methods should be described in detail while for well known methods,citation must be given.
If authors are willing to provide supoorting information for better understanding of the research work, please follow following guidelines:
Please use following method to give reference of your supporting files:For example "(Supporting Information File 1 for full experimental data)" may be placed at an appropriate place in "Experimental" of "Results" sections.
in this section authors can acknowledge financial support, technical assistance and other contributions or advice from persons who are not coauthors.
A complete list of all references must be provided at the end of the manuscript with an individual reference number for each reference. Arabic numerals should be used for all references in the order in which they are first cited in the text/tables/figures. Use squre brackets to mention references in the text.
Use commans in case of multiple citations within the square brackets. In case of more than two sequential references, ranges should be given.
Followings are the examples for reference style of ANALYTICAL ATOMIC SPECTROSCOPY:
Figures and Schemes
The following file formats are accepted:
SVG (preferred format for diagrams), WMF (suitable for diagrams), MML (suitable for mathematical formulas), EMF (suitable for diagrams), BMP (suitable for images), GIF (suitable for images), TIFF (suitable for images),CDX (ChemDraw, preferred format for chemical structures), PNG (preferred format for photos or images) and JPEG (suitable for photographic images).
To ensure that such images will be of high quality in the website and in the pdf article, a minimum of 300 dpi (colored graphic) or 600 dpi (black and white graphic) is needed.
The parameters are benchmarks which should be used to prepare chemical structures with chemical structure editors such as ChemDraw, etc.
chain angle 120 degree, bond spacing 18% of width, fixed length 0.406 cm (11.5 pt), bold width 0.056 cm (1.6 pt), line width 0.046 cm (1.3 pt), hash spacing 0.071 cm (2 pt), scale 100% and font 8 pt
All tables of the manuscript must be placed in the manuscript after the paragraph where they are first time referenced. Large datasets can be uploaded separately as supporting information file. The following guidelines must be adhered while preparing tables:
Equations in the research article should be numbered in Arabic numerals in parentheses on the right side, i.e. (1), (2), etc. Each equation must fit a width of 8.2 cm (single column) and longer equations should be split accordingly. In case of Microsoft Word documents, use equation editor to write an equation .
The purpose of graphical abstract is to provide quick visulation of scientific research work in the manuscript.A graphical abstract must be prepared as a separate file.Do not embade it in the main manuscript. The size of graphical abstract should be 15 by 5 cm.Dublicacy in figures should be avoided while preparing graphical abstract.
We are encouraging authors to provide supporting information files for better understanding of their research work.All supporting information files (If any) must be submitted along with the manuscript and will be publised alongside the accepted manuscript.You can provide detailed experimental procedures including graphs, photos, animations, movie files, large tables, rotatable molecular models, characterization data, spectra or X-ray crystallographic data as supporting information file.
LaTeX Users: LaTeX user must submit a ZIP archive containing the *.tex document, a PDF version of supporting information file, the corresponding *.bib file (if any) and all referenced files (graphic files, etc.).Content Related Info
The first page of the supporting information files must contain title of research paper, authors name and affiliations.Page numbers must be given for supporting information file containing text. Each supporting information files must have mentoned in the main manuscript.The contents should be in PDF or Microsoft Word, animations should be in SWF (Shockwave Flash) ormat, movies in MOV (QuickTime) or MPG (MPEG) format and Tabular data in XLS (Excel sheet) or CSV format.
The corresponding author is requested to contact the Payam Scientific Publishing about any substantial error occurring in a published article . our Email: .Request of author will be evaluated by editor and will be published separately if it impacts seroiusly the interpretation of the work. All authors of research work must approve any desired amendment or correction.
Manuscripts which are not adhering the authors' guidelines will be returned to authors without scientific evaluation. Submitted manuscripts adhering to journal guidelines are reviewed by the Editor-in-Chief or an Editor, who will assign them to reviewers. He/She will send the manuscript for two reviwers. The Editor will prepares a decision letter according to comments of the reviewers. All non-reviewed manuscripts are sent back within 3 days and the decision letters of manuscripts are sent within 7 days.
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, CC BY (or the Creative Commons Attribution-NonCommercial License CC BY-NC), which allows users to (noncommercially) copy, use, distribute, transmit and display the work publicly and to make and distribute derivative works, in any digital medium for any responsible purpose, subject to proper attribution of authorship.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
The advice and information in this journal are believed to be true and accurate , neither the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Payam Scienfic Publishing is committed to maintain high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the publisher.Future publication of such authors will be restrcted.
All manuscript will be pass throug an Initial Plagiarism Check using Well Known Plagiarism Check Software. Manuscripts with a high "Similarity Index" will be examined for matching sources.
The submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere.
Journal of "ANALYTICAL ATOMIC SPECTROSCOPY" is an Open Access journal that is all research papers are freely available world wide.Due to open access, there is no need to pay to view/download any research papers from ANALYTICAL ATOMIC SPECTROSCOPY. We would like to assure authors that electronic version of research papers on Payam Scientic Publishing (PSB) will be subscription free for any University/Library or individual.Thus, there is no source of revenue of Payam Scientic Publishing. You may be aware that online publication involves costs whcih include creating/mainting setup of the publication infrastructure,HTML conversion, DOI assignment, peer review process,maintaining indexing record, editing and archiving.To cover these costs, we depend on Article Process Charges / Publication Fees. Following Article Process Charges will be due after research paper accepted for publication.
ANALYTICAL ATOMIC SPECTROSCOPY--- Article Processing Charges -- $180*
Note-* For Low-Income Countries, Article Processing Charges may be reduced.
Article Processing Charge for Journals having Similar Scope
Payam Scientific Publishing is not requesting any publication fee during submission.Article processing Charges will be requested only after acceptance of the research paper.We are also not charging per page or for color figures or for any other items.You may be aware that other publishers are charging money for such things.
Corresponding Author/authors of a research paper will be responsible for arranging publication fees.There are numerous ways that author can manage publication fees.He/she can request his/her working organization for paying the article processing fees.
The research project funded by any funding agency may cover Open Access Article Processing Charges. For Open Access mandates, you are requested to to visit:
These are some funding sources that may support Open Access Publishing at Payam Scientific Publishing:
Corresponding author is requested to talk to your organization/University/Institutes for supporting Open Access publication.
In guinine cases for Low-Income Countries,Payam Scientific Publishing is giving reduction in Article Processing Charges. This scheme is called PSOAPF.You can write an application for reduction in Open Access Fees.We are already charging very small amount as compared to other known publishers.Still we are ready to support your quality and innovative research work.Article processing charges will not be hurdle for quality research work in Payam Scientific Publishing.
PSOAPF will be decided on the bases of the first author/corresponding author's country.If one of the author (first/corresponding) belong to High Income Country, Payam Scientific Publishing will consider only High Income Country to decide for PSOAPF.This policy is due to avoid the misuse of PSOAPF.
Corresponding author is requested to make sure that the submitted manuscript in any journal of Payam Scientic Publishing has not been published previously in any form and must not be currently under consideration for publication elsewhere.It is expected that the manuscript must not be submitted to any other journal during the review process.In case corresponding author want to know the time for review, he/she should send the email to journal regarding status of the manuscript.Corresponding author can also withdraw the manuscript at any time during review process.Please send us an email stating the reason for withdrawing the manuscript.
We are only charging publication fees as stated above.The Article processing charges will be informed immediatly after submitting the manuscript. Corresponding author needs to pay once the manuscript is accepted for publication. Payam Scientific Publishingis putting a lot of effort during review process.It is expected that the authors must stick for publishing after acceptance.After acceptance of the manuscript, any request for withdrawl of manuscript will be treted as serious breach of academic conduct.
The artcile processing charges are non refundable.We will refund only those payments which have been made by mistake or in excess of the amount required.